Skip to content
Log inDashboard

Asus (Asuswrt-Merlin)

Asuswrt-Merlin (and recent stock Asus firmware) can forward the router’s DNS over TLS. The router connects to the address you give and sends the host name as the TLS server name, which selects your profile.

You need: your profile id and a device name for the router (such as asus). The server addresses are opdns’s shared addresses.

  1. Open WAN → Internet Connection → WAN DNS Setting. Set Connect to DNS Server automatically to No, and leave the two DNS server fields empty, or the provider’s servers stay in use next to opdns.

  2. Set DNS Privacy Protocol to DNS-over-TLS (DoT) and DNS-over-TLS Profile to Strict.

  3. Under DNS-over-TLS Server List, delete the presets and add one server:

    Field Value
    Address 23.166.164.53
    TLS Port 853
    TLS Hostname <device>-<profile-id>.dns.opdns.net

    Click Add. Add a second server the same way with the address 23.166.164.35, so the router has another one to try. Then click Apply.

  4. Make sure LAN clients use the router: in LAN → DHCP Server, leave DNS Server 1 and DNS Server 2 empty, so the router hands out its own address.

  5. Optional: to catch devices that hard-code another DNS server, enable LAN → DNSDirector (called DNSFilter on older Merlin releases) with the global mode Router.

  6. Check it works from a LAN device: its queries appear under the router’s device name.

  • One device name for the whole network. The router makes the queries, so every LAN device appears under the router’s name. For per-device names, configure encrypted DNS on each device as well.
  • Strict means no fallback. If opdns is unreachable, name resolution stops on the network until you set DNS-over-TLS Profile to Opportunistic or change the server.
  • Stock firmware. Recent stock Asus firmware has the same WAN DNS settings; older stock releases lack the DoT server list, and the DHCP guide is the fallback.